Warbird Information Exchange

DISCLAIMER: The views expressed on this site are the responsibility of the poster and do not reflect the views of the management.
It is currently Thu Mar 28, 2024 9:46 am

All times are UTC - 5 hours


Classic Wings Magazine WWII Naval Aviation Research Pacific Luftwaffe Resource Center
When Hollywood Ruled The Skies - Volumes 1 through 4 by Bruce Oriss


Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: TBM Tanker conversion
PostPosted: Sun Dec 01, 2013 5:54 pm 
Offline

Joined: Sat Dec 22, 2012 12:30 pm
Posts: 4
I am currently building a Monogram/Revell TBM and converting it into a firebomber. I could use alittle advice as to how to fill in the area behind the canopy where the turret was, a plug you might say. Anyone know of how to do this? Write me with a tip or two if you can.

steve zuger
salem, oregon


Top
 Profile  
 
PostPosted: Sun Dec 01, 2013 7:56 pm 
Offline
User avatar

Joined: Sun Jun 07, 2009 1:13 pm
Posts: 671
Location: Indiana
I'd probably use sheet styrene for the rough work and blend it with Bondo spot putty (or your filler of choice).

_________________
Image


Top
 Profile  
 
PostPosted: Sun Dec 01, 2013 9:50 pm 
Offline
Long Time Member
Long Time Member
User avatar

Joined: Wed Jan 24, 2007 1:54 am
Posts: 5116
Location: Stratford, CT.
WIXerGreg wrote:
I'd probably use sheet styrene for the rough work and blend it with Bondo spot putty (or your filler of choice).


That would be my suggestion! Good Luck! And remember.... lots of pics!

_________________
Keep Em' Flying,
Christopher Soltis

Dedicated to the preservation and education of The Sikorsky Memorial Airport

CASC Blog Page: http://ctair-space.blogspot.com/
Warbird Wear: https://www.redbubble.com/people/warbirdwear/shop

Chicks Dig Warbirds.......right?


Top
 Profile  
 
PostPosted: Sun Dec 01, 2013 11:07 pm 
Offline
1000+ Posts!
1000+ Posts!

Joined: Sun Nov 15, 2009 12:40 pm
Posts: 1454
Lone Star Models make a 1/48 conversion set for the TBM if that is of any assistance.

http://www.lonestarmodels.com/conversions-1-48.html


Top
 Profile  
 
PostPosted: Tue Dec 03, 2013 11:19 am 
Offline

Joined: Wed Jan 19, 2011 4:43 pm
Posts: 153
C VEICH wrote:
Lone Star Models make a 1/48 conversion set for the TBM if that is of any assistance.

http://www.lonestarmodels.com/conversions-1-48.html


Plus decals!


Top
 Profile  
 
PostPosted: Sun Mar 02, 2014 12:28 pm 
Offline
User avatar

Joined: Thu Aug 16, 2007 4:04 pm
Posts: 641
Location: Central Texas
Steve,

Here's one I built in 1/72 using Mike's Lone Star resin conversion and decals from Draw Decals:

Image

Image

Image

Good luck on your project and post some photos.

-Derek


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group