Warbird Information Exchange
http://warbirdinformationexchange.org/phpBB3/

BT-13 Project That Needs to be Put Together
http://warbirdinformationexchange.org/phpBB3/viewtopic.php?f=26&t=23705
Page 1 of 1

Author:  BruceH [ Wed Aug 13, 2008 8:09 pm ]
Post subject:  BT-13 Project That Needs to be Put Together

I have all the pieces and parts and more of a BT-13 project. I have a couple of airplanes in different states of disrepair to make one. The engine is currently sitting at Covington awaiting overhaul and I have a prop with 0 hours. The only thing that I don't have is the correct prop hub. This is a PROJECT and just about every piece/part is going to need to be touched but you will have a great plane when it is done. I am in the middle of a restoration project that went from building a flyer to putting it into show condition. If you are interested in the BT-13 contact me. Bruce

Author:  jbell [ Sat Aug 16, 2008 8:51 pm ]
Post subject: 

Dover? Heck, I thought everyone in Dover moved to Granite City! :wink:

Author:  BruceH [ Sun Aug 17, 2008 3:53 pm ]
Post subject: 

They did. We let them move so that we could have the lake all to ourselves.

Author:  jbell [ Sun Aug 17, 2008 5:03 pm ]
Post subject: 

Any relatives up this way? I think they're ready to come back home now. Do you want them back?
I'd love to have your BT-13 project. Good luck......John

Author:  marine air [ Wed Aug 20, 2008 9:47 pm ]
Post subject: 

I have a friend that may be interested, Please email me your phone number, He lives in Westmoreland, Tenn. and has been wanting to find a BT.
Thanks

Author:  BruceH [ Sun Aug 24, 2008 6:18 pm ]
Post subject: 

I sent the phone number to your yahoo.com account. Let me know if you didn't get it.
Bruce

Author:  Dave Hackett [ Fri Sep 05, 2008 3:45 pm ]
Post subject: 

Sent you a pm. Let me know if you need more information.

dave

Author:  BruceH [ Sat Jan 03, 2009 12:40 pm ]
Post subject:  BT-13

I was toying with the idea of selling by 13 project but am now a lot more serious about trying to clean out one of my hangars. I have more than enough parts to put this bird back together so I don't think you would have to scrounge around to find much if anything. Remember though if interested, this is a project and every piece will need to be touched.
Thanks
Bruce

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/