Warbird Information Exchange

Hi, we need the following 2W1 series washers for the overhaul of our throttle - does anyone happen to have any available or alternate details? We've drawn a blank on 2W1 series, but there must be some out there somewhere.......

2W1-32-28-32.................2 off
2W1-58-60-32.................1 off
2W1-17-20-31.................1 off

Also need the following Button head Screws.........

7S1-10-48.......................1 off
7S1-8-8...........................1 off
7S1-416-48......................2 off

Again, any help locating or details of appropriate alternatives very welcome.

Many thanks

2W1 Microfilm N362
1st is ID in 64ths
2nd is OD in 32nds
3rd is thickness in Thousandths
1020 Steel if no Nomenclature like AL, ext

7S1 Microfilm H451
10-48= 10/32 X 3"
10-8= 10/32 X 1/2"
416-48= 1/4/28 X 3"
Length - Number is length in 16ths
Screws longer than 2 1/2" may have an unthreaded shoulder under the head.

_________________
Rich Palmer

Remember an Injured Youth
benstear.org
#64- Stay Strong and Keep the Faith

BOOM BOOM, ROUND ROUND, PROPELLER GO

Don't Be A Dilbert!

That's perfect, thanks Rich

I keep preaching Blueprints for those who operate these things.

_________________
Rich Palmer

Remember an Injured Youth
benstear.org
#64- Stay Strong and Keep the Faith

BOOM BOOM, ROUND ROUND, PROPELLER GO

Don't Be A Dilbert!

I completely agree Rich, there is no substitute, which is why we have all of them printed on paper and filed. Sadly, however, living over a hundred miles from the workshop it's not always practical to reference them..............

I have a set on the computer, actually portable hard drive.
Good luck with your parts search.

_________________
Rich Palmer

Remember an Injured Youth
benstear.org
#64- Stay Strong and Keep the Faith

BOOM BOOM, ROUND ROUND, PROPELLER GO

Don't Be A Dilbert!