Warbird Information Exchange http://warbirdinformationexchange.org/phpBB3/
AN224-3 Fasteners Needed http://warbirdinformationexchange.org/phpBB3/viewtopic.php?f=26&t=53251	Page 1 of 1

---

Author:	Yak3 [ Mon Jun 09, 2014 12:07 pm ]
Post subject:	AN224-3 Fasteners Needed
Hi, we need a couple of AN224-3 fasteners for a part we're overhauling. These are part of a "press-stud" type arrangement. We only need two, but cannot locate any. Anyone have or know of some? Any ideas very welcome. Thanks

---

Author:	bdk [ Mon Jun 09, 2014 12:34 pm ]
Post subject:	Re: AN224-3 Fasteners Needed
That spec is obsolete and I can't find a crossover to a later NAS spec. Can you provide a photo or a better description? What are they used for?

---

Author:	Yak3 [ Mon Jun 09, 2014 12:55 pm ]
Post subject:	Re: AN224-3 Fasteners Needed
They're used for attaching control column boots to parts - in this case the control column boot for a P-51 - these attach to the main control lock casting bracket. These part attach to the bracket by way of a 100 degree countersunk screw. The boots contain the second part of the clip which then is pushed onto the AN224. Hope that makes sense!

---

Author:	51fixer [ Mon Jun 09, 2014 9:33 pm ]
Post subject:	Re: AN224-3 Fasteners Needed
A commercial quality snap similar to these is what most use- http://www.mcmaster.com/#fabric-snaps/=sc9z9a Otherwise search ebay US and UK might get you the lift the dot stud types. http://www.ebay.com/sch/i.html?_trksid= ... &_from=R40

---

Author:	bdk [ Tue Jun 10, 2014 3:56 pm ]
Post subject:	Re: AN224-3 Fasteners Needed
FASTENERS, SNAP, STYLE 4 (THREE WAY LOCKING TYPE) MS27983 calls out AN227 snaps. NASM27981 SUPERSEDES AN227

---

Author:	Yak3 [ Tue Jun 10, 2014 4:28 pm ]
Post subject:	Re: AN224-3 Fasteners Needed
Thank you gentlemen, that's a great help. Certainly helps plug the information gap.

---

Page 1 of 1	All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/