Warbird Information Exchange
http://warbirdinformationexchange.org/phpBB3/

DeHavilland Sea Venom FAW.53 WZ-897
http://warbirdinformationexchange.org/phpBB3/viewtopic.php?f=26&t=53306
Page 1 of 2

Author:  Ghostrider870 [ Mon Jun 16, 2014 2:09 am ]
Post subject:  DeHavilland Sea Venom FAW.53 WZ-897

A recently started project of mine, former RAN Sea Venom WZ-897 currently held by the Thomas aircraft collection (formerly known as the Camden air museum) at Harrington park NSW.
Image
It was retired from service in 1966 and partially scrapped, the fuselage pod was saved though gutted.
For starters I'm concentrating on cleaning out decades of assorted muck, treating a lot of corrosion and finding all the workings. The woodwork is in fantastic condition with
no visible delamination. The fabric covering is original and intact though the paint is flaking in several areas. The cockpit is very bare with the entire starboard console removed, all the instruments and avionics are gone but what's there is intact and repairable. I've scrounged about 80% of the missing parts for the office.
Image
Image
Image
Image
I spent last weekend sorting through a rats nest of wiring in the gun bay, after several hours of untangling and profanity it looks like I dont have to rewire as much as originally thought.
I have a complete and runnable engine and if I am able to locate the wings, booms and tail of one of the many wrecks around the country the goal of the project would be a complete taxyable aircraft.
This is my fifth Sea Venom resto since 1981.

Author:  avenger2504 [ Sun Jun 22, 2014 1:46 am ]
Post subject:  Re: DeHavilland Sea Venom FAW.53 WZ-897

Your fifth Sea Venom restoration? You should be able to do one in your sleep by now! :lol:
Maybe do an A4 next, looks like you have the experience. The RNZAF gave one of your old A4Gs back, see if you convince them to make it a flyer.Maybe then we could get one of ours back in the air by going "See? The Aussies are allowed to fly theirs!" :wink:
Baz
New Zealand

Author:  Fouga23 [ Sun Jun 22, 2014 1:11 pm ]
Post subject:  Re: DeHavilland Sea Venom FAW.53 WZ-897

Cool project!

Author:  Brenden S [ Tue Jun 24, 2014 1:22 am ]
Post subject:  Re: DeHavilland Sea Venom FAW.53 WZ-897

When I was there I was told the wings were out the back.

Author:  Ghostrider870 [ Thu Jun 26, 2014 4:30 am ]
Post subject:  Re: DeHavilland Sea Venom FAW.53 WZ-897

The wings out the back are from our two Vampires, an F.30 (A79-14) and a T.22 trainer (XA-101)

Author:  ausflyboy [ Sat Jun 28, 2014 5:46 pm ]
Post subject:  Re: DeHavilland Sea Venom FAW.53 WZ-897

I beleive QAM has spare tailbooms and wings.

Author:  avenger2504 [ Sat Jun 28, 2014 7:19 pm ]
Post subject:  Re: DeHavilland Sea Venom FAW.53 WZ-897

Be nice to see a Sea Venom fly again. I take it this one wont be?

Author:  Ghostrider870 [ Tue Jul 01, 2014 4:28 am ]
Post subject:  Re: DeHavilland Sea Venom FAW.53 WZ-897

Not a flyer unfortunately, far beyond our budget. Depending on finding wings etc a runnable airframe is doable.

Author:  Brenden S [ Wed Jul 02, 2014 8:28 pm ]
Post subject:  Re: DeHavilland Sea Venom FAW.53 WZ-897

Steve, it is great to see you guys are moving along.

Author:  Ghostrider870 [ Tue Jul 08, 2014 2:38 am ]
Post subject:  Re: DeHavilland Sea Venom FAW.53 WZ-897

A bit of treasure hunting

Image

Image

Image

I now have enough parts to fit out the rear bulkhead which as you can see badly needs some attention.

Image

Author:  DH82EH [ Fri Jul 18, 2014 9:58 am ]
Post subject:  Re: DeHavilland Sea Venom FAW.53 WZ-897

Great project.
It looks pretty daunting. :shock:
Knowing you have parts and experience makes me look forward to seeing your progress.

Andy Scott

Author:  Ghostrider870 [ Fri Jul 25, 2014 10:05 pm ]
Post subject:  Re: DeHavilland Sea Venom FAW.53 WZ-897

Still sorting parts

Image

Image

On the plus side I have nearly everything to complete the cockpit,

I've fitted the engine mounts, some hydraulics and untangled some of the wiring. I want to get everything up on the bulkhead to see
what is and isn't there before worrying about painting etc.

Image

Image

Author:  Ghostrider870 [ Sun Jul 27, 2014 7:40 pm ]
Post subject:  Re: DeHavilland Sea Venom FAW.53 WZ-897

Yesterdays effort
Rebuild & reinstalled the port side hydraulic manifold and filter block
Refitted layshaft bearings for the throttle & HP
installed ammo cover, oxy taps and some UHF wiring in the ammo bay

Image

Image

Image

Author:  Ghostrider870 [ Fri Sep 12, 2014 4:34 am ]
Post subject:  Re: DeHavilland Sea Venom FAW.53 WZ-897

Popped out the instrument panel to treat some corrosion in the magnesium structure, the rest of what's in there appears ok
except for the cut wiring (I'd really like to met that side cutter wielding sod!)

Image

Image

Image

It turned out the instrument panel fitted didnt belong to 897 but had been replaced with one from WZ-902 at some stage.
I had 897's in amongst the spares heap so now I can start rewiring and rebuilding it.

Image

Image

Author:  Fouga23 [ Sun Sep 14, 2014 9:35 am ]
Post subject:  Re: DeHavilland Sea Venom FAW.53 WZ-897

Thanks for the update :)

Page 1 of 2 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/