Warbird Information Exchange http://warbirdinformationexchange.org/phpBB3/ |
|
Link Trainer Fuel Gauges http://warbirdinformationexchange.org/phpBB3/viewtopic.php?f=26&t=53440 |
Page 1 of 1 |
Author: | RAFCommands [ Sun Jun 29, 2014 2:12 pm ] |
Post subject: | Link Trainer Fuel Gauges |
Hello All, I've struck out trying to source two fuel gauges in the UK and Europe for my Link D2 restoration. No luck on Barnstormers, Ebay or other commercial Link Trainer Spares sources. Wonder if any of you have one or more kicking about your workshops that could be exchanged for some dosh. The type used was common to C and E types then followed on fitted into CA, ANT etc This is a piccky of the instrument type in an early trainer version (to the left of the altimeter) http://i306.photobucket.com/albums/nn258/swinnfamily_2008/rach4006.jpg This is a view of the Air Trainers Type D2 that I'm restoring http://forum.keypublishing.com/attachme ... 81&thumb=1 The empty holes top right of the panel are where the two gauges should live. Regards Ross McNeill |
Author: | RAFCommands [ Fri Nov 28, 2014 8:55 am ] |
Post subject: | Re: Link Trainer Fuel Gauges |
Cheers Dom, That's the beast I've sent a PM with an offer and contact email. Sorry about the brain fade, as you correctly say my version is a D4 Mk I - an early one (serial D4-030). Back in the day I worked on both the RAF D4 Mk I and the D4 Mk II. The RAF Jet Mk II had only a few cosmetic changes to your piccy such as suction, oil, radio tuner/loop sense instrument format and fuel selector switch position. Regards Ross |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |