Warbird Information Exchange http://warbirdinformationexchange.org/phpBB3/ |
|
T-6/Harvard parts needed for project http://warbirdinformationexchange.org/phpBB3/viewtopic.php?f=26&t=55862 |
Page 1 of 1 |
Author: | Harvard 4 [ Mon May 11, 2015 4:07 pm ] |
Post subject: | T-6/Harvard parts needed for project |
Hi, needed for a T-6/Harvard rebuild: Vertical fin 2 x Horizontals 2 x elevators 1 x tail u/c and strut (steerable) 1 x wing centre section Pair ailerons set of flaps Anyone have these available? Thanks |
Author: | C.6-60 [ Sat May 07, 2016 1:30 am ] |
Post subject: | Re: T-6/Harvard parts needed for project |
Hello Harvard 4 You didn't say weather your project was a flyer or a static rebuild. I have a Harvard Mk.II Center Section overhauled by Northwest Industries Limited, Edmonton Alberta. It is in excellent airworthy condition. Has been in storage since the War. I also have Elevators, and Ailerons in New Old Stock condition or covered in sheet metal for outdoor exhibit aircraft use. Please PM me or e-mail me to discuss further and send pictures if you are interested. Vincent |
Author: | Harvard 4 [ Mon May 09, 2016 9:55 am ] |
Post subject: | Re: T-6/Harvard parts needed for project |
Hi Vincent, what's your e-mail? |
Author: | C.6-60 [ Wed May 11, 2016 12:23 am ] |
Post subject: | Re: T-6/Harvard parts needed for project |
PM sent with e-mail address Vincent |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |