Page 1 of 1

T-6/Harvard parts needed for project

Posted: Mon May 11, 2015 4:07 pm
by Harvard 4
Hi, needed for a T-6/Harvard rebuild:

Vertical fin
2 x Horizontals
2 x elevators
1 x tail u/c and strut (steerable)
1 x wing centre section
Pair ailerons
set of flaps

Anyone have these available?

Thanks

Re: T-6/Harvard parts needed for project

Posted: Sat May 07, 2016 1:30 am
by C.6-60
Hello Harvard 4
You didn't say weather your project was a flyer or a static rebuild.

I have a Harvard Mk.II Center Section overhauled by
Northwest Industries Limited, Edmonton Alberta.
It is in excellent airworthy condition. Has been in storage since the War.

I also have Elevators, and Ailerons in New Old Stock condition or
covered in sheet metal for outdoor exhibit aircraft use.

Please PM me or e-mail me to discuss further and send pictures if you are interested.

Vincent

Re: T-6/Harvard parts needed for project

Posted: Mon May 09, 2016 9:55 am
by Harvard 4
Hi Vincent, what's your e-mail?

Re: T-6/Harvard parts needed for project

Posted: Wed May 11, 2016 12:23 am
by C.6-60
PM sent with e-mail address
Vincent