Warbird Information Exchange http://warbirdinformationexchange.org/phpBB3/ |
|
Torquing DC-3 engine mount http://warbirdinformationexchange.org/phpBB3/viewtopic.php?f=26&t=56333 |
Page 1 of 1 |
Author: | James Dagg [ Wed Jul 22, 2015 11:15 am ] |
Post subject: | Torquing DC-3 engine mount |
Does anyone have the torque values for the engine mount to firewall bolts for a DC-3 and where that information can be found. Thanks |
Author: | James Dagg [ Wed Jul 22, 2015 11:15 am ] |
Post subject: | Re: Torquing DC-3 engine mount |
I should have said that the engines are Wright 1820's |
Author: | CraigQ [ Mon Jul 27, 2015 7:38 am ] |
Post subject: | Re: Torquing DC-3 engine mount |
Check with Bill Muszala, owner of ATW Aviation in Marana AZ. Bill should be able to help you with that if you haven't found the data yet. |
Author: | bdk [ Mon Jul 27, 2015 5:53 pm ] |
Post subject: | Re: Torquing DC-3 engine mount |
That info isn't in the maintenance manual? Aren't the QECs usually removed and reinstalled at those points? |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |