This is the place where the majority of the warbird (aircraft that have survived military service) discussions will take place. Specialized forums may be added in the new future
Mon Oct 26, 2020 8:51 am
A Shackleton engine run with a difference!
https://www.youtube.com/watch?v=1qmsC3cPNXQWow......how much energy these 4 engines together are pulling!!!!!
Mon Oct 26, 2020 9:01 am
It's perhaps also a view on the local bricklaying skills....
Mon Oct 26, 2020 11:55 am
Back in the mid-1990's after the RAF had retired their Shack's, the construction company that I was working for at the time, had a building cladding testing facility in the yard of their facility, and they bought 2 complete ex-Shack Griffon's with contra prop's and nacelles etc., and mounted them on specially built frames and used them to create very high wind forces for testing new types of building cladding.......and as you can see from this film, they were perfect for the job
The engines are still in use to this day still testing new types of cladding.
Mon Oct 26, 2020 2:22 pm
Firebird wrote:Back in the mid-1990's after the RAF had retired their Shack's, the construction company that I was working for at the time, had a building cladding testing facility in the yard of their facility, and they bought 2 complete ex-Shack Griffon's with contra prop's and nacelles etc., and mounted them on specially built frames and used them to create very high wind forces for testing new types of building cladding.......and as you can see from this film, they were perfect for the job
The engines are still in use to this day still testing new types of cladding.
Brings to mind, the F-4U that was used at a glass factory in St. Louis, MO for the testing of glass panes.
Saludos,
Tulio
Mon Oct 26, 2020 3:02 pm
Brings to mind, the F-4U that was used at a glass factory in St. Louis, MO for the testing of glass panes.
Anyone remember the typhoon fuselage section that was used in a basement as a windmill?
Tue Oct 27, 2020 7:07 am
I'm not involved with the guys at Coventry, but if I remember rightly the SPT sold a complete Griffon unit to a Middle Eastern construction company about ten years ago to test the glass they were making for skyscrapers.
In regards to the Typhoon in the basement, the only one I've heard of was a chopped up Typhoon squeezed into the basement of the Napier factory and used for Sabre development.
Tue Oct 27, 2020 11:43 am
In regards to the Typhoon in the basement, the only one I've heard of was a chopped up Typhoon squeezed into the basement of the Napier factory and used for Sabre development.
That's the one. I remember seeing a picture of it a long time ago.
Tue Oct 27, 2020 2:06 pm
LysanderUK wrote:I'm not involved with the guys at Coventry, but if I remember rightly the SPT sold a complete Griffon unit to a Middle Eastern construction company about ten years ago to test the glass they were making for skyscrapers.
That we did, it went to Dubai, and as far as we know its still going strong alongside the one they already had.
- Attachments
-
Tue Oct 27, 2020 3:06 pm
It is not my intention, nor my wish, to hijack this interesting thread.
Here it is, the only photo I have of the St. Louis MO, wind-machine Corsair. Photographer unknown to me.
Saludos,
Tulio
- Attachments
-
- windmachine corsair.jpg (51.74 KiB) Viewed 810 times
Tue Oct 27, 2020 4:52 pm
Richard Woods wrote:LysanderUK wrote:I'm not involved with the guys at Coventry, but if I remember rightly the SPT sold a complete Griffon unit to a Middle Eastern construction company about ten years ago to test the glass they were making for skyscrapers.
That we did, it went to Dubai, and as far as we know its still going strong alongside the one they already had.
The ones we bought in the early 90's came from Pete Rushen at TFC.
Looking at those ones in Dubai, I wonder if they were in contact with Vinci at Leighton Buzzard (where they are now based) as the support frames are pretty much identical?
Tue Oct 27, 2020 5:48 pm
There definitely was a similar influence on both, I think the Dubai company copied the idea. They also had a massive old Russian radial, but the Griffons coped better, so we were told.
I think the TFC Griffons will have all come out of the same batch that went through auction in 1991 and ended up scattered around the world. I think there are some still sat with Vintage V12's, and Air Atlantique had about 20 of them that ended up in various places.
Thu Oct 29, 2020 9:12 am
When I was working on the Exchange Plaza high rise in Perth Australia in the late 80's the curtain walling samples were tested using a radial from a DC4, 6 or 7? The company doing the curtain walls went bust soon after so I wonder what happened to it.This was my first experience of hearing and feeling a large radial from close range and seeing the start up procedure and how necessary the man with the fire extinguisher was. Exciting days for a young Architect!
Thu Oct 29, 2020 9:29 am
Fighter Rebuilders in Chino built a similar contraption using a surplus R-3350 for a Southern California customer. It has been a long time, but maybe in the late 1980s or very early 1990s?
Thu Oct 29, 2020 10:19 am
I saw this about a year ago. At $100+ a pop to fire it up, I didn't hear it run.
https://abc7news.com/b-36-bomber-cold-w ... on/330144/
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.