| Warbird Information Exchange http://warbirdinformationexchange.org/phpBB3/ |
|
| Need help identifying this part http://warbirdinformationexchange.org/phpBB3/viewtopic.php?f=5&t=72510 |
Page 1 of 1 |
| Author: | DesertExplorer [ Wed Mar 24, 2021 8:52 pm ] | ||
| Post subject: | Need help identifying this part | ||
I found this part near Mojave, Ca recently. Approximately 2"X2"X1". CVS-43131-1 is stamped on one side and appears to be made of lead. There are scuff marks about 1/3 of the way up the slope that make it look like it was wedged under something. Any ideas?
|
|||
| Author: | bdk [ Thu Mar 25, 2021 3:11 pm ] |
| Post subject: | Re: Need help identifying this part |
Probably a control surface mass balance weight. |
|
| Author: | DesertExplorer [ Fri Mar 26, 2021 6:13 pm ] |
| Post subject: | Re: Need help identifying this part |
Thank you bdk. That gives me an area to start digging into. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|