| Warbird Information Exchange http://warbirdinformationexchange.org/phpBB3/ |
|
| T-6/Harvard assembly advice - offered http://warbirdinformationexchange.org/phpBB3/viewtopic.php?f=52&t=64386 |
Page 1 of 1 |
| Author: | Jason [ Fri Dec 23, 2016 2:35 am ] |
| Post subject: | T-6/Harvard assembly advice - offered |
Ok.... here's some usefull advice for anyone that's interested: BEFORE you attach either left or right outer mainplane onto the centre section..... install the little clip that holds the lower rear piece of the wing attach angle cover onto the centre section attach angle FIRST using that darn countersunk screw. Merry Christmas Jason |
|
| Author: | RobC [ Thu Dec 29, 2016 10:27 pm ] |
| Post subject: | Re: T-6/Harvard assembly advice - offered |
Thanks for the tip, Jason. I can see it would be easy to miss, and missing it would be a pisser. |
|
| Author: | zedzil [ Sat Dec 31, 2016 7:54 pm ] |
| Post subject: | Re: T-6/Harvard assembly advice - offered |
I can only see it removed when one replaces the lower center wing bolting angle. Not very common business... |
|
| Author: | Jason [ Fri Feb 17, 2017 3:25 am ] |
| Post subject: | Re: T-6/Harvard assembly advice - offered |
Yeah.... I've just finished putting together a Harvard IV that many other people before me pulled apart & "lost" all the hard to find parts..... etc etc. I jigged & totally rebuilt the centre section with new skins & attach angles etc.... same with the outer mainplanes. I just didn't notice that the darn clip for the attach angle cover's had a countersunk screw to go in before attachment of the outer's. Apart from that I have found the aircraft very maintenance friendly! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|