Warbird Information Exchange

DISCLAIMER: The views expressed on this site are the responsibility of the poster and do not reflect the views of the management.
It is currently Thu Mar 28, 2024 2:32 pm

All times are UTC - 5 hours


Classic Wings Magazine WWII Naval Aviation Research Pacific Luftwaffe Resource Center
When Hollywood Ruled The Skies - Volumes 1 through 4 by Bruce Oriss


Post new topic Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Sat Aug 15, 2015 11:14 pm 
Offline

Joined: Wed Dec 10, 2008 7:25 pm
Posts: 520
Location: Travis AFB
I need advice about how to best preserve/treat the wood and wires on the 1912 vintage Gonzales Tractor No. 1 Biplane. It is intended for museum display.

More info about the airplane at this link https://doolittlecenter.org/html/gonzales.html

photo on line here https://www.flickr.com/photos/jacksnell707/16982745321

note I tried posting this under Vintage Aviation, but got no response


Top
 Profile  
 
PostPosted: Tue Aug 18, 2015 4:40 pm 
Offline
2000+ Post Club
2000+ Post Club

Joined: Tue Jun 14, 2005 10:16 am
Posts: 2295
Do you mean how they did it back then... or how they do it now?

_________________
Those who possess real knowledge are rare.

Those who can set that knowledge into motion in the physical world are rarer still.

The few who possess real knowledge and can set it into motion of their own hands are the rarest of all.


Top
 Profile  
 
PostPosted: Tue Aug 18, 2015 9:12 pm 
Offline

Joined: Wed Dec 10, 2008 7:25 pm
Posts: 520
Location: Travis AFB
What should I use now to treat and preserve this aircraft so it will last another 100 years.
So far my research reveals that I could use SPAR VARNISH. Available at Lowes.
or should I use Shellac Varnish?
aircraft is stored in a non climate controlled hangar.


Top
 Profile  
 
PostPosted: Wed Aug 19, 2015 2:45 pm 
Offline
Been here a long time
Been here a long time

Joined: Sun May 02, 2004 1:16 am
Posts: 11276
Any idea what was used on it previously? Anything you put on top may not stick if it is incompatible.


Top
 Profile  
 
PostPosted: Thu Aug 20, 2015 11:13 pm 
Offline

Joined: Wed Dec 10, 2008 7:25 pm
Posts: 520
Location: Travis AFB
It looks like nothing has ever been used on the wood. just bare wood.
It is just drying out.
I'm afraid during the winter when it rains, moisture will do damage.

Right now I'm thinking Spar Varnish is best. But I need expert opinions


Top
 Profile  
 
PostPosted: Thu Aug 20, 2015 11:51 pm 
Offline
1000+ Posts!
1000+ Posts!
User avatar

Joined: Wed Aug 18, 2010 12:51 pm
Posts: 1185
Location: Chandler, AZ
Spar varnish is the classic choice. If there is any question about reacting with the finish underneath, shellac is the traditional choice for a barrier. It doesn't react with things over or under it, but it's fragile by itself.
If conservation (and possible future restoration) is the major concern then the simplest oil based spar varnish is probably best
If preservation is foremost, then one of the urethane modified spar varnishes would be a better choice.

In any case, make a note in an inconspicuous spot in india ink between coats. Coat of varnish, note, coat of varnish over it. Whoever has to deal with it next time will thank you

_________________
Lest Hero-worship raise it's head and cloud our vision, remember that World War II was fought and won by the same sort of twenty-something punks we wouldn't let our daughters date.


Top
 Profile  
 
PostPosted: Sat Aug 29, 2015 6:46 pm 
Offline
2000+ Post Club
2000+ Post Club

Joined: Tue Jun 14, 2005 10:16 am
Posts: 2295
ALOHADAVE wrote:
What should I use now to treat and preserve this aircraft so it will last another 100 years.
So far my research reveals that I could use SPAR VARNISH. Available at Lowes.
or should I use Shellac Varnish?
aircraft is stored in a non climate controlled hangar.


In the UK, Valspar brand is highly rated. As you're in California you may have to source from out of State so you don't end up with the usual useless crap we have to tolerate.

_________________
Those who possess real knowledge are rare.

Those who can set that knowledge into motion in the physical world are rarer still.

The few who possess real knowledge and can set it into motion of their own hands are the rarest of all.


Top
 Profile  
 
PostPosted: Wed Sep 02, 2015 10:56 pm 
Offline

Joined: Tue Feb 10, 2009 10:00 pm
Posts: 22
Location: vacaville ca
ask the travis guys who built the new lower center section ... you also should support the plane to keep the weight off the skids..... good luck,i took care of the b-25 when it was there!!!!


Top
 Profile  
 
PostPosted: Wed Sep 02, 2015 11:29 pm 
Offline

Joined: Wed Dec 10, 2008 7:25 pm
Posts: 520
Location: Travis AFB
yes, I talked to them already, they said just leave it alone??
I agree about getting the weight off skids. I recommended taking the engine off the plane.
I submitted my recommendations, it is now up to the Doolittle Center to decide.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group