My father decided to pull out the old Crown / Minecraft 1/144th scale P-38J model kit and backdate it to the much sleeker looking E/F model. Still haven't decided on what markings to apply. What do you guys think?
"I hate having to reshape 2 engine cowlings and 4 radiators."
I forgot what a train wreck the Crown P-38 was. Nothing lines up. A bunch of putty and sanding!" -Dennis
"So after looking over the clear bolb canopy that came with the kit I thought I would try something else. Then after several attempts to home version vacuform a canopy using a Bandai canopy for a mold, I thought I had one I could work with. NOPE, just too brittle and by forming over the Bandai canopy it just made it too large. So I'll try something else. I thought of using the Bandai canopy and after looking it over for a while I just couldn't bring myself to rework and take a major part from a $50 model. So these pic's show the latest attempt of me trying something else. Might work, have to see what it looks like when I'm done. So we'll give the super glue a few days to really cure then we will try to sand it all to a finished shape hoping it doesn't fall off. I'm hoping the Krystal Klear with work with us." -Dennis
"So the super glue was cured and I sanded the framework to what seemed close to what I wanted, but something still didn't seem right. Oh yea... the cross bracing in the side windows were missing. Well we still had some extra lengths of clear stretched sprue that we use for antenna wire for larger models. You can still see a piece of it in a micrometer and it measures up at .005. Once this glue cures I'll blend in the glue joints. OK You can bring me my Medication now!" - Dennis
"I brushed on Model Master bottle O.D. Its kind of thick but thats ok I wanted to see if I got all the seams on the frame joints. I guess the plan is once it is really dry to sand the canopy to be sure the paint is not lumpy, then block off the bottom and give a finale coat of the OD spray can. Then give the cockpit bottom a coat of flat black. Once all is dry we will start with the Krystal Klear. Then I will either have a P-38E/F with an acceptable canopy or a blob of melted plastic."-Dennis
"Say, do these "Guns" look the correct size? Will be positioned correctly at final installation." - Dennis
"The front windscreen, top canopy and 2 side windows have the Krystal Klear. Even tho it was upside down when it dried the top canopy concaved a little bit. Gotta think of a way to fix that." -Dennis
Seeing that the top canopy concaved a bit I decided not to use the Krystal Klear on the last 4 bigger windows. Going back thru the supplies I found some thinner clear plastic so I took the bandai canopy back out and tried to vac u form again just to get some pieces.
"This time it somewhat worked enough so that I could start cutting and fitting. You can see the vac u formed canopy and to the right of it one of the front side windows. For a size perspective I put a nickel next it." -Dennis
"Another size perspective pic." -Dennis
"The 2 front side windows are in, once the glue is dry the edges of the windows will be blended in to the frames and body with paint." -Dennis
All set, waiting for the right markings to come along.
