Page 1 of 1

Oooopppssssssss

Posted: Fri Aug 23, 2019 8:31 am
by Michel Lemieux
Oooopppssssssss

Hoping the link works!



Stupid part is they had no line to prevent it rotating.......the wing just nudged the boom a bit......and the results speak for themselves.....

Found a different version and imbedded it.
- Scott Rose, WRG Editor

Re: Oooopppssssssss

Posted: Fri Aug 23, 2019 9:59 am
by Scott Rose
That is one sketchy looking crane to start with

Re: Oooopppssssssss

Posted: Sat Aug 24, 2019 8:24 am
by Tony C
The H&S Planning meeting consisted of the following phrase...

"What could possibly go wrong?"

Re: Oooopppssssssss

Posted: Sat Aug 24, 2019 2:47 pm
by Snake45
Link no good. "403 Error" on two different browsers.

Re: Oooopppssssssss

Posted: Sun Aug 25, 2019 12:25 pm
by airnutz
403 error here too!

Re: Oooopppssssssss

Posted: Sun Aug 25, 2019 6:19 pm
by Scott Rose
Video fixed!

Re: Oooopppssssssss

Posted: Mon Aug 26, 2019 8:21 am
by airnutz
Thanks Scott! Too little sense and under-craned! :shock:

Re: Oooopppssssssss

Posted: Mon Aug 26, 2019 9:52 am
by Snake45
What is it they were trying to do? (Why were they lifting it?)

Re: Oooopppssssssss

Posted: Tue Aug 27, 2019 5:49 pm
by Craig59
Wonder if the EGPWS was shouting, “OBSTACLE, OBSTACLE...TERRAIN, TERRAIN!”

Re: Oooopppssssssss

Posted: Wed Aug 28, 2019 6:17 pm
by BigGrey
One of the first things you learn as a crane operator is to never let the load swing and contact the boom or you will have the result on the video. You must have tag lines controlled on the ground to avoid the boom contact. I might have chosen a larger crane to do that pick though.