I'm looking for a set of flaring punches and don't want to spend a million bucks. 1" to 3". Any leads?
| Warbird Information Exchange https://warbirdinformationexchange.org/phpBB3/ |
|
| Flaring Punches https://warbirdinformationexchange.org/phpBB3/viewtopic.php?f=26&t=42781 |
Page 1 of 1 |
| Author: | sdennison [ Sun Oct 02, 2011 11:03 am ] |
| Post subject: | Flaring Punches |
I'm looking for a set of flaring punches and don't want to spend a million bucks. 1" to 3". Any leads?
|
|
| Author: | The Inspector [ Sun Oct 02, 2011 12:50 pm ] |
| Post subject: | Re: Flaring Punches |
www.vansantent.com |
|
| Author: | Cvairwerks [ Sun Oct 02, 2011 12:56 pm ] |
| Post subject: | Re: Flaring Punches |
Kent has a set that runs from 1" to 3" in 9 steps..... http://www.tinmantech.com/html/punch_and_flare_avi.php |
|
| Author: | SeptRepair [ Mon Oct 03, 2011 9:37 pm ] |
| Post subject: | Re: Flaring Punches |
http://www.irvansmith.com/scart/punches ... 54_55.html I bought the complete set and am quite happy for the price. I had my own 3" and 6" flanging tools made. I don't like the all in one action. I prefer to cut my own hole first and then flare it. It seems most manufacturers dont bother with the larger sizes past 2.5" on flaring dies. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|