Warbird Information Exchange

DISCLAIMER: The views expressed on this site are the responsibility of the poster and do not reflect the views of the management.
It is currently Mon Jun 23, 2025 9:04 pm

All times are UTC - 5 hours


Classic Wings Magazine WWII Naval Aviation Research Pacific Luftwaffe Resource Center
When Hollywood Ruled The Skies - Volumes 1 through 4 by Bruce Oriss


Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Budd RB-1 Conestoga
PostPosted: Thu Jul 21, 2005 11:55 am 
Offline

Joined: Thu Dec 09, 2004 10:07 pm
Posts: 340
Location: Houston Tx.
I was researching info on this A/C and ran across this message from Walter Bauer sent to Pima,
My great Aunt was a "Rosie the rivater" at Budd Corp. during the WWII.
She was the only woman to ride in this bird and on landing, they had a small mishap
whereas the plane ran off the runway and put a dent in the stainless steel, nose area.
They sent some to Pax River NAS, where after the war, they pushed them into the river,
guess they are still there. They were gas hogs so they didn't pan out as far as the military
was concerned.Lots of good storys about this aircraft.
Flying Tiger Cargo Co. purchased some to fly also. This is the only place I know,
that there is one on display.If any one knows the whereabouts of others, please contact me.
I hope to get up to see it sometime.
Anyone have info on this? Being pushed in the river that is, and how would stainless steel hold up in that envioronment?

Tim Landers


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jul 21, 2005 5:36 pm 
Offline
User avatar

Joined: Tue Jan 25, 2005 11:39 pm
Posts: 764
Location: Huntsville, Alabama
Tim,

Satainless Steel is very resiliant over time and extrememly resistent to corrosion. So I think your concern for the main body of the aircraft is good foconcern, But I don't think it will be damaged too much by the environment it finds itself in now. Unless the warter in question has a high salinity quality,

The Pima Air Muesum in Tucson, Arizona has what is essntially a complete airframe, and while it itsn't really put togeher...it could be made so fairly quickly I would think.

Paul


Top
 Profile  
 
 Post subject: Budd example
PostPosted: Thu Jul 21, 2005 5:48 pm 
Offline

Joined: Fri Jun 17, 2005 3:15 pm
Posts: 951
Therer is amphibian built by the Budd Company of Philadelphia PA, that is located outside of the Franklin Institute in center city Philadelphia. It is as bright as the day it was built. All the cloth surfaces have long since vanished, but this plane has been on exhibit there for over 40 years.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jul 22, 2005 11:42 pm 
Offline
Long Time Member
Long Time Member
User avatar

Joined: Sun Oct 10, 2004 4:43 pm
Posts: 7501
Location: northern ohio
paul, their are low grades of stainless steel that do rust / corrode.consult a welder/ metallurgist he'll fill you in. my 2 bro in laws are pro welders & told me that. i believed your opinion prior to that fact too. best, tom

_________________
tom d. friedman - hey!!! those fokkers were messerschmitts!! * without ammunition, the usaf would be just another flying club!!! * better to have piece of mind than piece of tail!!


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jul 23, 2005 5:56 pm 
Offline
Been here a long time
Been here a long time

Joined: Sun May 02, 2004 1:16 am
Posts: 11324
I think there was the Bell Airobonita (sp) and an AR-234 that I recall. Residue was still visible in the '70s I think.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: Chris Brame, Fearless Tower, Google [Bot] and 56 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group