gemmer wrote:
Buz wrote:
The P-40CU was the first production model of the P-40 line (Curtiss Designation H81A) with little to no armour, self sealing tanks, only one gun per wing etc, and were later converted to RP-40CU, and P-40G-CU (those that survived)
Buz
The a/c is a P-40(no CU manufacturer code). The block number/Manufacturer code system was not in effect until after the start of the war. The first P-40 to use it was the P40F-5 CU. The RP-40 was not
a conversion. The R prefix designation was Restricted, meaning restricted from combat use. It was applied to a number of older a/c with excessive hours. As an example the B-17D The Swoose was redesignated RB-17D.
Duane
Duane
Agree with you entirely, as that's what the IRC's state (P-40 and later some changed to either P-40G or RP-40), however to throw the cat amoungst the pigeons, Some curtiss plates I have seen show P-40CU (CU seems to be later stampings - by whom I have no idea), whilst some have plain P-40.
Same with some of the P-40E1, some show P-40-E-1, some show P-40E-1 and others show P-40-E1-CU. Some P-40E's are again different although not with the CU on them (yet to see one with CU on it). You have P-40E or P-40-E...............I haven't seen any P-40B/C/D plates as of yet (well originals anyhow), and only ever seen 1 P-40F, which was marked as P-40-F. Sometime ago I was offered a P-40G plate however the price was more than I was will to pay (14k IIRC), however I believe someone on here may know of or have access to a P-40G plate so would be interesting to see what that one states.
This is the most confusing bit of my struggles to understand and track the P-40's...........the aircraft histories are the easy bit the understanding the stampings, then add that the P-40 was know by three different designations between the USAAC (as it was at the time) and Curtiss................mmmmmmm mind blowing.
Buz