Warbird Information Exchange

DISCLAIMER: The views expressed on this site are the responsibility of the poster and do not reflect the views of the management.
https://warbirdinformationexchange.org/phpBB3/

Help to Identify these wheels

https://warbirdinformationexchange.org/phpBB3/viewtopic.php?f=5&t=46335

Page 1 of 1

Help to Identify these wheels

Posted: Wed Jul 11, 2012 3:35 am
by rodchenko
Hi I have a pair of wheels i need help in identifying. Was told it was a Corsair but not sure. Have the following info
Made by Hayes Industries Inc Date both 1942 Serial No X8382 & X8859 Assy No G3126A & G3126A Size 11.00 x 12 Has a hex shaped screw cap to access the hub (one has Alcoa written on the inside the other a G) it has six kidney shaped holes. If you can help that would be great I can send a pic, Cheers Rod

Re: Help to Identify these wheels

Posted: Fri Jul 13, 2012 9:58 pm
by Chris
Pictures?

Re: Help to Identify these wheels

Posted: Mon Jul 16, 2012 10:43 am
by Versatile
rodchenko wrote:Hi I have a pair of wheels i need help in identifying. Was told it was a Corsair but not sure. Have the following info
Made by Hayes Industries Inc Date both 1942 Serial No X8382 & X8859 Assy No G3126A & G3126A Size 11.00 x 12 Has a hex shaped screw cap to access the hub (one has Alcoa written on the inside the other a G) it has six kidney shaped holes. If you can help that would be great I can send a pic, Cheers Rod


I think D-18 Beech or AT-11 maybe. irrc. The disc brake Beech ran 1100-12 as well as some At-11s.
All times are UTC - 5 hours
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/