Warbird Information Exchange

Does anyone have any of these parts for display only? I am trying to finish off a T-33 ROCAT seat. I'm sure these parts are used on many different seats though.
1) I need the (elastic bands) that hold the com. cable close to the oxy hose on the seat. I don’t have a part number. They look very much like the ones that hold the com cord to the hose on some oxygen masks. They are just cable holders to hold the cable close to the oxy hose from the seat.

2) Do you have any of the 4 wire cable used to connect to the female plug from the oxy hose to the com block on the seat? (It is for the U-92A/U plug).

3) I also need a quick disconnect and the braided hose for it that connects from the catapult to the initiator. The part number is: PN S110L 101B4 The hose is for the gas line from in initiator and it is braided stainless steel. A piece about 24” long with both ends. One end for the quick disconnect.

Any information on locating these parts would be greatly appreciated. Here is a picture of the quick disconnect.

Best regards,

Lorne Bohn