Warbird Information Exchange

Conducting a static restoration of an AT-6B at the Chanute Air Museum, Rantoul IL. USA. Among our used stock supplies we are finding various/miscellaneous T-6/Harvard parts we would like to sell or trade for parts needed for our restoration. The restoration thread here is viewtopic.php?f=52&t=49469

Our web page: http://p51h.home.comcast.net/~p51h/at6b/index.htm
Our Trade/Sale Page: http://p51h.home.comcast.net/~p51h/at6b/sale/sale.htm
Our Wish List: http://p51h.home.comcast.net/~p51h/at6b ... h_List.htm

A few items just listed follows. See our trade/sale page for pictures, details and prices.
These items are used, and have had various degrees of cleaning and bead blasting to determine part numbers.

19-33410 ARM - PARKING BRAKE CONTROL (2 available)
19-43012 BELLCRANK ASSEMBLY - ENGINE MIXTURE CONTROL LOWER
28-43006 BRACKET - THROTTLE MIXTURE & PROPELLER BELLCRANK SUPPORT
28-43014 BELLCRANK ASSEMBLY - ENGINE THROTTLE CONTROL LOWER
28-43014-2 BELLCRANK ASSEMBLY - ENGINE THROTTLE CONTROL LOWER
36-33547 BELLCRANK ASSEMBLY - L.H. LDG. GR. LOCK PIN CONTROL ROD OUTBOARD
36-33549 BELLCRANK ASSEMBLY - L.H. LDG. GR. LOCK PIN CONTROL ROD OUTBOARD
36-43011 BELLCRANK ASSEMBLY - ENGINE MIXTURE CONTROL UPPER
36-43017 & 36-43016 BRACKET AND BELLCRANK - CARB. AIR CONTROL UPPER
36-43017 & 36-43016-2 BRACKET AND BELLCRANK - CARB. AIR CONTROL UPPER
36-44007 & 55-44008 BRACKET & BELLCRANK - PROP CONTROL FRONT
54-73304 YOKE - OXYGEN CYLINDER RETAINING
55-33469 LINK - BRAKE CABLE TURNBUCKLE ATTACHING (6 AVAILABLE)
55-43013 BELLCRANK ASSEMBLY - ENGINE THROTTLE CONTROL UPPER
55-44011 BELLCRANK ASSEMBLY - PROPELLER CONTROL REAR
55-52421 BRACKET - FUSELAGE STA. 4 RUDDER RIGHT CABLE PULLEY w/PULLEY AND GUARD
55-52423 BRACKET - RUDDER PEDAL BALANCE CABLE PULLEY w/PULLEY AND GUARD
55-52504 BRACKET - ELEVATOR TRIM TAB REAR RIGHT PULLEY w/2 PULLEYS AND GUARD

I HAVE SOME INSTRUMENTS TO SEND AND I HAVE YOUR ADDRESS. I NEED TO KNOW IF ALL THE INSTRUMENTS NEED THE SAME COLOR DIALS? SAM 316 312 6538

OMG!
Has it been so long since I checked this post?!!!
Very Sorry, SamSirSam!

To answer your question, no, dial colors are non-critical. I will be refurbishing all the gauge faces anyway.
THANKS!!!

I am no longer monitoring this thread. Please see my web site at http://p51h.home.comcast.net/~p51h/at6b/index.htm and/or email me from the CONTACT page on the site.

Thanks

Norm
aka Mustanger

I HAVE NOT FORGOT YOU. I WILL BE SENDING SOME OF THE INSTRUMENTS NEXT WEEK. I HAVE INCLUDED SOME EXTRA CUT AWAY AND OTHER OPEN INSTRUMENTS YOU CAN USE FOR SHOW. SAM