Warbird Information Exchange

Hi we have the following T-6 spares available - we are UK based....

T-6 SPARES FOR SALE

1 X Wooden Seat
6 X Exhaust /heater sleeve 126BG 07-53325 (Harvard)
80 X Carb gasket
2 X 10.5 ” Harvard tailwheel hub Kelsey Canada 11-44 SERKL9881
Misc. fillets
5 X Elevator trim tabs
3 X Rudder trim tabs
1 X Aileron trim tab
4 X New boxed Hand Pump Assy 0110-55 58024-2 yellow tagged
2 X Boxes Allison Engine Bolts AN74A3
1 X Fin support bracket 78-311668 good
4 X Misc exhaust
3 X Engine foot step assy’s 55-31377
1 X U/C Pintle starboard
9 X Flap actuator 55-58032 – need overhauling
1 X Harvard IIB Centre section maybe available – rough, needs work
1 X Pump Hyd A602110
Turtle Deck T-6D/ G 4 pcs – 78-31013 and brackets missing top curved piece, glazing maybe available.
2 X Heater louvres? 36-71623
1 X Bracket assy 59-73029
1 X P&W seal 288045A
1 X Pole – crank handle assy?
2 X Horizontal Stabiliser tips
1 X Complete port u/c leg assy

Boxes of copper exhaust gaskets

1 X rectangular baggage door (rough)
4 X NOS boxed T-6G tailwheel assys
1 X Selector valve U-1051
4 X Selector valve 37D8114
3 X Complete tailwheel surround panels 88316-63 – both sides – ok need work
2 X Starboard wing gun top fairing
4 X Elevators
1 X Tailplane (lightweight)
1 X Port side panel OK
6 X Brake Assy, essentially new, 2 boxed and mint
2 X Port Mae Wests 77-31066 one damaged.
1 X Pesco oil separator 35-647

Pratt and Whitney (Canada) Boxed Spares

20X Piston Rings
2 X Boxes Pratt & Whitney grommetts 32383 NOS
4 X Boxes studs 35142P8 30 pcs per box
2 X Boxes pipe assy 14669 C 15329 + 10 60pcs
2 X Boes bushings 24855 9pcs
1 X Bushing 91433A 10pcs
1 X Box Stud 23264
1 X Box ref 0235 9016 K BEN…. (unclear?)
1 X Box Studs 29981P4A Studs
1 X Gear unit CA14636
6 X Cog units 151602 13
20 X Engine bearings 171021
8 X Boxes valve springs 10079 10pc per box
8 X 1340 Seal Kit 116999
1 X Boxed cover 38114 D
4 X Rockers Cover 38113
1 X Pipe 49968
1 X Bag 27549
1 X Bag 146341

Cheers!

Ben

_________________
Life's a Beech and an Armed T-6

I am interested in the wooden seat, and the T6-G tail wheels. Can you send photos of the seat and confirm PN on the tail wheels. Are they 12.5x4.5 and do they have differenct size bearings inside and outside.

Fritz Mehrer
avdflyr@cox.net

Hi Fritz - the wooden seat is really for a static rebuild without a lot of work being put into it - the t/w assys are the mounting t/w leg and axle not the wheels themselves - they are however new and in superb condition.

TT

_________________
Life's a Beech and an Armed T-6

Can you please send a photo of the wood seat. Do you think it may fit a static Stearman.??

I need a mufler heater shroud (muff) for an SNJ-5. jpf

Good evening, I'm interested in a few of these parts, can you make contact please?

Thank you

You guys are responding to a thread that is more than 10 years old. Also, TexanTomcat has not logged on the board for more 18 months now, and his website is defunct.