TriangleP wrote:
I don't know the dimensions of KA114, but found these dimensions of a Mosquito FB VI (similar to an FB.26) online: Wingspan - 54'-2" (16.52 M), Length - 41'-8" (12.74 M). IIRC, wing(s) is one assembly that bolts to the fuselage. Typical shipping container is 45 feet. There is a new 53 foot container thats been introduced, but it's useless as well. So is shipping by air freight the only answer? A 747 will work, but is there regular service with these to Oz?...
I wonder how Australia got its first shipment of FB.VIs back in the day and what condition they were in when they arrived?
It's in New Zealand. Australia (Oz) is the
other one down there.
I happened to be sitting in the lounge of a Mr Powell with a Mr Yagen and several other interested people when we discussed the question in September (events have moved on since). IIRC, as one of the Mozzie experts there checked, when you remove everything from the Mozzie wing, it gets to 51 ft (the wingtips come off). and with flaps, nacelles etc removed it becomes narrower in chord, about 8 ft. (Can't remove the leading edges, they're built in.)
The US railroad extended container was discussed as an option, as were several other choices. No conclusion was reached except it would be expensive and the chainsaw option (used for the trip to NZ) was ruled out.
As to how they got them 'here' and to NZ before - they flew them of course! A Mosquito is a long range high performance aircraft, and no other way would be particularly sensible in the era. NZ is a water crossing from Aus of approximately 1400 miles or 2,250 km. There's a couple of islands where smaller a/c can make stops, but for something like a Mosquito, it's not a big deal, and the British and Australian built examples flew East to the Antipodes. The Pacific crossing as a flight is possible for a Mosquito, but it seems to be a risk beyond consideration (and then a continental crossing of the US would be required, a lot of engine and system time just to get somewhere).
Regards,