Warbird Information Exchange

DISCLAIMER: The views expressed on this site are the responsibility of the poster and do not reflect the views of the management.
It is currently Thu Jun 19, 2025 3:24 am

All times are UTC - 5 hours


Classic Wings Magazine WWII Naval Aviation Research Pacific Luftwaffe Resource Center
When Hollywood Ruled The Skies - Volumes 1 through 4 by Bruce Oriss


Post new topic Reply to topic  [ 18 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Thu May 30, 2013 11:48 am 
Offline
Long Time Member
Long Time Member
User avatar

Joined: Fri Apr 30, 2004 7:13 pm
Posts: 5664
Location: Minnesota, USA
http://www.eaa.org/news/2013/2013-05-30 ... -P-51D.asp

_________________
It was a good idea, it just didn't work.


Top
 Profile  
 
PostPosted: Thu May 30, 2013 12:15 pm 
Offline
Long Time Member
Long Time Member

Joined: Fri Feb 03, 2012 1:48 pm
Posts: 7817
Outstanding!! ... and certainly NOT to take away from his accomplishments, but a "70 year old airplane"? I understand that the mustang was designed 70 years ago, but I would assume the mustang he was flying is quite new is it not? No flame war just an observation. Never the less a great feat on his part no matter what type of piston engine airplane.

_________________
Zero Surprise!!...


Top
 Profile  
 
PostPosted: Thu May 30, 2013 12:21 pm 
Offline
Long Time Member
Long Time Member

Joined: Sat Dec 22, 2007 12:36 am
Posts: 7961
Location: Mt. Vernon, WA.
What was the fuel octane grade? I find it 'unusual' that you can get to 40K on 100LL

_________________
Don't make me go get my flying monkeys-


Top
 Profile  
 
PostPosted: Thu May 30, 2013 12:46 pm 
Offline

Joined: Wed Jun 01, 2011 11:23 am
Posts: 699
Never knew a Mustang had no heater.


Top
 Profile  
 
PostPosted: Thu May 30, 2013 1:04 pm 
Offline
2000+ Post Club
2000+ Post Club
User avatar

Joined: Wed May 30, 2007 3:57 pm
Posts: 2339
Location: Minnesota
Mark Allen M wrote:
Outstanding!! ... and certainly NOT to take away from his accomplishments, but a "70 year old airplane"? I understand that the mustang was designed 70 years ago, but I would assume the mustang he was flying is quite new is it not? No flame war just an observation. Never the less a great feat on his part no matter what type of piston engine airplane.


It's no 'new build' (really only a very few Mustangs that could be considered that anyway), but it is off of a rather recent restoration. The aircraft has a great, long, civilian history, and has never been wrecked (so presumably very original still).

Great for Doug Mathews! It's encouraging that there are still guys like him trying to set new records.


Top
 Profile  
 
PostPosted: Thu May 30, 2013 1:59 pm 
Offline
1000+ Posts!
1000+ Posts!
User avatar

Joined: Sun Nov 15, 2009 12:57 pm
Posts: 1263
Location: Lacombe, Alberta, Canada
No heat? :shock:

_________________
Defending Stearmans on WIX since Jeff started badmouthing them back in 2005.


Top
 Profile  
 
PostPosted: Thu May 30, 2013 3:18 pm 
Offline
3000+ Post Club
3000+ Post Club
User avatar

Joined: Tue Jul 17, 2007 9:11 pm
Posts: 3160
Location: MQS- Coatesville, PA
Stephan Wilkinson wrote:
Never knew a Mustang had no heater.

It doesn't have a heater but does have sources of heat.
Its a hot water toilet to begin with, coolant based engine cooling.
If it is still installed there is a source for some hot air which is a hole in the exit duct aft of the radiator. For most flying at lower altitudes you don't need heat and usually don't have enough cool air.
When it gets real cold there isn't enough hot air. I believe most wartime pilots bundled up pretty good. Some had outlets for heated suits to plug into.

_________________
Rich Palmer

Remember an Injured Youth
benstear.org
#64- Stay Strong and Keep the Faith

BOOM BOOM, ROUND ROUND, PROPELLER GO

Don't Be A Dilbert!


Top
 Profile  
 
PostPosted: Thu May 30, 2013 3:24 pm 
Offline
2000+ Post Club
2000+ Post Club
User avatar

Joined: Wed Jun 27, 2007 10:23 pm
Posts: 2347
Location: Atlanta, GA
When Doug allowed me to crawl over 44-84933 it appeared to be in vanilla configuration, fairly unmodified over the years, which, I believe enhances its value. At best it's 68 years old and I suspect, like many T-6s, the heater was disconnected to minimize the threat from CO poisoning.

Great job Doug!

_________________
"Take care of the little things and the big things will take care of themselves."


Top
 Profile  
 
PostPosted: Thu May 30, 2013 4:28 pm 
Offline

Joined: Wed Jun 01, 2011 11:23 am
Posts: 699
Quote:
to minimize the threat from CO poisoning.


That would only be true of an air-cooled engine (T-6), where the heat source of necessity is a muff around an exhaust manifold. (If the exhaust leaks, the CO goes into the heater duct.) Not a problem with a liquid-cooled engine (P-51), where the heat source is the coolant.


Top
 Profile  
 
PostPosted: Thu May 30, 2013 4:42 pm 
Offline
3000+ Post Club
3000+ Post Club
User avatar

Joined: Fri May 07, 2004 10:10 pm
Posts: 4403
Location: Maypearl, Texas
Did he beat Will's climb record in his former Yak as well??


Top
 Profile  
 
PostPosted: Thu May 30, 2013 4:55 pm 
Offline

Joined: Wed Jun 01, 2011 11:23 am
Posts: 699
Quote:
Did he beat Will's climb record in his former Yak as well??


Wasn't that airplane flying in a different weight category?


Top
 Profile  
 
PostPosted: Thu May 30, 2013 6:49 pm 
Offline
2000+ Post Club
2000+ Post Club
User avatar

Joined: Wed Jun 27, 2007 10:23 pm
Posts: 2347
Location: Atlanta, GA
Stephan Wilkinson wrote:
Quote:
to minimize the threat from CO poisoning.


That would only be true of an air-cooled engine (T-6), where the heat source of necessity is a muff around an exhaust manifold. (If the exhaust leaks, the CO goes into the heater duct.) Not a problem with a liquid-cooled engine (P-51), where the heat source is the coolant.


Good point, I wasn't using my noggin. Would be nice for someone to chime in regarding the heat methods used in WWII beyond thick/electric clothing.

_________________
"Take care of the little things and the big things will take care of themselves."


Top
 Profile  
 
PostPosted: Thu May 30, 2013 7:20 pm 
Offline
Long Time Member
Long Time Member

Joined: Fri Feb 03, 2012 1:48 pm
Posts: 7817
JohnTerrell wrote:
It's no 'new build' (really only a very few Mustangs that could be considered that anyway), but it is off of a rather recent restoration.


Thx, my thoughts were on the lines of this, just didn't phrase it correctly.

_________________
Zero Surprise!!...


Top
 Profile  
 
PostPosted: Thu May 30, 2013 8:20 pm 
Offline
Long Time Member
Long Time Member

Joined: Sat Dec 22, 2007 12:36 am
Posts: 7961
Location: Mt. Vernon, WA.
Ken wrote:
Stephan Wilkinson wrote:
Quote:
to minimize the threat from CO poisoning.


That would only be true of an air-cooled engine (T-6), where the heat source of necessity is a muff around an exhaust manifold. (If the exhaust leaks, the CO goes into the heater duct.) Not a problem with a liquid-cooled engine (P-51), where the heat source is the coolant.


Good point, I wasn't using my noggin. Would be nice for someone to chime in regarding the heat methods used in WWII beyond thick/electric clothing.

A major complaint of the P-38 in Europe was it's lack of a heater, must have had something to do with being designed and built in the San Fernando Valley.

_________________
Don't make me go get my flying monkeys-


Top
 Profile  
 
PostPosted: Thu May 30, 2013 9:20 pm 
Offline
1000+ Posts!
1000+ Posts!
User avatar

Joined: Sun Nov 15, 2009 12:57 pm
Posts: 1263
Location: Lacombe, Alberta, Canada
The Inspector wrote:
A major complaint of the P-38 in Europe was it's lack of a heater, must have had something to do with being designed and built in the San Fernando Valley.


That always struck me as odd; you would think that with those two liquid cooled V-12's that the P-38 would have been able to cook the poor pilot right out of it - even at thirty thousand feet.

_________________
Defending Stearmans on WIX since Jeff started badmouthing them back in 2005.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 18 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: Google [Bot] and 266 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group