P-47 D Instrument Panel

[sulaco]

Someone know these measure??





A=
B=
C=
D=
F=



Thanks

[HELLDIVERS]

Hi,

If your drawing is to scale project it on the wall enlarge it until your instruments are at full size this should get you very close.

Thanks Mike

[bdk]

Most instruments are 3-1/8" in diameter to the outside of the circular part (just inside of the attachment screws). The Directional Gyro hole is 3" in diameter as I recall. The clock fits in a 2-1/4" hole as do the instruments on the lower right panel.

[sulaco]

I did the scale part, in AutoCAD, I`m just checking if I did it right.