I know alot of you build models, here's a place for you to discuss model related items and to post pictures of your projects.
Post a reply

Biplane Trio - Old 1:48 Lindberg Kits

Fri Nov 02, 2007 1:29 am

Rigged using stretched sprue (Stearman & Rapide) and Aeroclub stretchy rigging thread.

:)

Darius

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Fri Nov 02, 2007 10:21 am

Awesome! I have the first two still in a box, but not the last. Sometime in the far future I may find time to assemble them.

Fri Nov 02, 2007 4:06 pm

I have a question about the stretched sprue rigging. I have never had good luck attaching the ends so it stays securely. Any advice on attaching?

Fri Nov 02, 2007 5:00 pm

Nice looking.... :D

Sat Nov 03, 2007 12:49 am

rwdfresno wrote:I have a question about the stretched sprue rigging. I have never had good luck attaching the ends so it stays securely. Any advice on attaching?


I first drill a hole with a microdrill held in a pin vice. Then I insert the stretched sprue into the hole and secure it with a small drop of cyano (superglue) applied using the head of a pin.

Darius

Sat Nov 03, 2007 11:25 pm

i saw old lindberg brand on the post title & went running for the fire crackers..... but those are fabulous for such shoddy quality that they cranked out as a model maker. you must have done some serious mods to get those kits looking so gorgeous!!!

Sat Nov 03, 2007 11:28 pm

fyi.....as a kid i blew up / shot more lindberg brand models than any other, i guess if you have the knack even a poor quality made kit can look 1st class.

Sun Nov 04, 2007 12:49 am

I first drill a hole with a microdrill held in a pin vice. Then I insert the stretched sprue into the hole and secure it with a small drop of cyano (superglue) applied using the head of a pin.


I appreciate the advice. Your rigging look fantastic.

Ryan

Sun Nov 04, 2007 2:39 am

tom d. friedman wrote:i saw old lindberg brand on the post title & went running for the fire crackers..... but those are fabulous for such shoddy quality that they cranked out as a model maker. you must have done some serious mods to get those kits looking so gorgeous!!!


Tom

Quite a few of the 1:48 Lindberg biplanes are repops of old British "Inpact" kits, which are very nicely detailed even by today's standards (unlike some other Lindberg kits such as the Tiger, Cutlass, Draken, Starfire etc.) which I suspect were amongst the kits that you despatched all those years ago.

:)

Darius

Sun Nov 04, 2007 6:51 am

You did a great job on these vintage kits. Cleanly built and the nice work on the rigging.

Cheeers,

Fri Nov 09, 2007 1:35 pm

Is it sacrilege to show this? I built this bird some thirty years ago and eventually stole the propeller to build an early Hurricane. Now I'm recycling it into a scratchbuilt project that I've been thinking about building for some time.

Image

Scott
Post a reply