This is the place where the majority of the warbird (aircraft that have survived military service) discussions will take place. Specialized forums may be added in the new future
Sun Jun 12, 2005 10:29 pm
HarvardIV wrote:This sounds like a monumental engineering challenge to me!
Well BDk we'll need SRPatterson and Stumac to show us the right way to do it.
What a friggin idiot...
Harvard IV is either:
1. Some teenage kid who's never flown anything other than a PC, and who has nothing better to do than spend hours on the computer trolling. Or...
2. Someone who's entire knowledge of warbird restoration comes from boxes marked either Revell or Monogram. Or...
3. Some friggin idiot who's just getting in the way of some very serious discussions.
I believe there should be nothing diplomatic about this forum. Ban the little b*stard. Not for a week or two, but kick his stupid *ss off here for good. Come on Scott, it's time to lead WIX to a higher level. This kind of cr*p will kill the forum if you can't control it.
Fix this, and let's get back to some serious work...
Sun Jun 12, 2005 10:35 pm
careful with the snotty comments guys. If, in my opinion, someone is goading someone into an argument I will take action. Operative term here being in my opinion.. you are all adults, act like it. Banning is next...
Sun Jun 12, 2005 11:13 pm
I can well understand Steve's frustration and response to Chris 's smart *ss comments. Bla-Bla-Bla in my opinion or Bla-Bla-Bla I think wears very thin after hearing it hundreds of times. I just don't think Chris can control himself has he has to make some type of comment on practically every thread. For a time on his ID page here he listed one of his hobbies has arguing. This I believe. Maybe we need a special board section for inane,meaningless, self gratifing chatter???
Sun Jun 12, 2005 11:36 pm
What a friggin idiot...
Harvard IV is either:
1. Some teenage kid who's never flown anything other than a PC, and who has nothing better to do than spend hours on the computer trolling. Or...
2. Someone who's entire knowledge of warbird restoration comes from boxes marked either Revell or Monogram. Or...
3. Some friggin idiot who's just getting in the way of some very serious discussions.
I believe there should be nothing diplomatic about this forum. Ban the little b*stard. Not for a week or two, but kick his stupid *ss off here for good. Come on Scott, it's time to lead WIX to a higher level. This kind of cr*p will kill the forum if you can't control it.
None of the above:
We already talked about making comments we can't back up. These are groundless. Maybe I have a lot to say, but you can't discredit anything I've said about these attach angles. I'm all ears.
Sun Jun 12, 2005 11:48 pm
Hi Chris!
How come any conversation involving you ends up being a steaming pile of sh1t?
Just checking.
Sorry Scott.
Sun Jun 12, 2005 11:58 pm
Harvard,
You seem to know just enough to show how little you actually know. For example you talk about machining a new angle but the stresses induced during the machining process will be a problem. Guess what this isn't anything new there is a process called passivating that is a common practice done to many machined parts that eliminates stresses induced during the machining process.
My point is shut up and listen a little instead of running your mouth all the time. If you spent half the time working and learning about airplanes than you do gossiping on the internet people wouldnt be so irritated by you.
Mon Jun 13, 2005 12:05 am
Hi Chris!
How come any conversation involving you ends up being a steaming pile of sh1t?
Just checking.
Sorry Scott.
Simple, It's called scapegoating. We've got a lot of people with superegos on this board, and I won't back down to them.
Mon Jun 13, 2005 12:10 am
Harvard,
You seem to know just enough to show how little you actually know. For example you talk about machining a new angle but the stresses induced during the machining process will be a problem. Guess what this isn't anything new there is a process called passivating that is a common practice done to many machined parts that eliminates stresses induced during the machining process.
My point is shut up and listen a little instead of running your mouth all the time. If you spent half the time working and learning about airplanes than you do gossiping on the internet people wouldnt be so irritated by you.
If you know more, speak up! Let everybody else know too. You'll earn my respect as well.
Mon Jun 13, 2005 12:22 am
HarvardIV wrote:Hi Chris!
How come any conversation involving you ends up being a steaming pile of sh1t?
Just checking.
Sorry Scott.
Simple, It's called scapegoating. We've got a lot of people with superegos on this board, and I won't back down to them.
Huh? Scapegoating? Me no understandee?
Scapegoating what? Each other? Each of us? I guess "SuperEgo"= anyone. I would say anyone who disagrees with you, but, by all apearances, it's anyone who is not you. As far as respect, I don't think anyone here is looking for your's.
Hug's and Kisses,
Orv Bob
Mon Jun 13, 2005 1:04 am
We've got a lot of people with superegos on this board, and I won't back down to them.
Yours is the only ego at play here sonny Jim. You could learn a lot by reading and taking in the comments made by the professionals on this board....but you wont.
Having just spent over a week with one of your adversaries I can in all honesty say there isnt an ego there. You need an attitude check mate.
Mon Jun 13, 2005 11:19 am
Great, another useful post locked. The next person who makes a derogatory remark will be banned for a week.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.