TBM Tanker conversion

[warhawkghost]

I am currently building a Monogram/Revell TBM and converting it into a firebomber. I could use alittle advice as to how to fill in the area behind the canopy where the turret was, a plug you might say. Anyone know of how to do this? Write me with a tip or two if you can.

steve zuger
salem, oregon

[WIXerGreg]

I'd probably use sheet styrene for the rough work and blend it with Bondo spot putty (or your filler of choice).

[Warbird Kid]

I'd probably use sheet styrene for the rough work and blend it with Bondo spot putty (or your filler of choice).

That would be my suggestion! Good Luck! And remember.... lots of pics!

[C VEICH]

Lone Star Models make a 1/48 conversion set for the TBM if that is of any assistance.

http://www.lonestarmodels.com/conversions-1-48.html

[B-17 guy]

Lone Star Models make a 1/48 conversion set for the TBM if that is of any assistance.

http://www.lonestarmodels.com/conversions-1-48.html

Plus decals!

[viking73]

Steve,

Here's one I built in 1/72 using Mike's Lone Star resin conversion and decals from Draw Decals:







Good luck on your project and post some photos.

-Derek