C-47 Trailing wire system RL-42-B and BC-461
Sat Oct 06, 2012 5:27 am
Hello
We have, on our C-47, a trailing wire system that we are trying to put in order.
We already have the RL-42-B and BC-461 control box and only 3 parts of the system are missing
- MC-215 Mechanical Spline Shaft Assembly - RL-42-B to BC-461
- PL-112 Connector: RL-42-B (1) to BC-461 (1)
- WT-7-A Antenna Weight
Any help will be welcome to find the missing parts
Thanks
We have, on our C-47, a trailing wire system that we are trying to put in order.
We already have the RL-42-B and BC-461 control box and only 3 parts of the system are missing
- MC-215 Mechanical Spline Shaft Assembly - RL-42-B to BC-461
- PL-112 Connector: RL-42-B (1) to BC-461 (1)
- WT-7-A Antenna Weight
Any help will be welcome to find the missing parts
Thanks
Re: C-47 Trailing wire system RL-42-B and BC-461
Sat Oct 06, 2012 1:36 pm
Pat,
When I was looking for radio parts for the B-17, I found many of them on eBay, including a new-old-stock "bomber egg" (WT-7-A) still in its box. You may also be able to get the items you need from Jay Wisler or Taigh Ramey. The MC-215 spline shafts come in many lengths; be sure to get the right one.
When I was looking for radio parts for the B-17, I found many of them on eBay, including a new-old-stock "bomber egg" (WT-7-A) still in its box. You may also be able to get the items you need from Jay Wisler or Taigh Ramey. The MC-215 spline shafts come in many lengths; be sure to get the right one.
Re: C-47 Trailing wire system RL-42-B and BC-461
Sun Oct 07, 2012 3:19 am
Hello Dean
Thanks for your answer. Can you tell me who are Jay Wisler and Taigh Ramey?
I am also trying to find these items on ebay.. perhaps one day (I hope).. and for the MC-215 we need also three of them for the SCR-274
Thanks for your answer. Can you tell me who are Jay Wisler and Taigh Ramey?
I am also trying to find these items on ebay.. perhaps one day (I hope).. and for the MC-215 we need also three of them for the SCR-274
Re: C-47 Trailing wire system RL-42-B and BC-461
Sun Oct 07, 2012 3:26 am
Ok found.. I made a google searchpatelie wrote:Can you tell me who are Jay Wisler and Taigh Ramey?
Re: C-47 Trailing wire system RL-42-B and BC-461
Mon Oct 22, 2012 8:23 pm
Glad to see the progress ontinue on your Bird. I dont have answers where to find these items as the supplier i used in the past is out currently. But I do have about 50 of the antenna rod, the F-10. Let me know if you need that item.
Dave
Dave
Re: C-47 Trailing wire system RL-42-B and BC-461
Sat Oct 27, 2012 10:48 am
Hello Dave
Thanks for your proposal. Actually just the three parts listed in my first message are missing. And we hope to find them in the future.
Thanks for your proposal. Actually just the three parts listed in my first message are missing. And we hope to find them in the future.
Re: C-47 Trailing wire system RL-42-B and BC-461
Thu Nov 22, 2012 12:50 pm
Hello
We found the two PL-112 connectors
Still missing :
- MC-215 Mechanical Spline Shaft Assembly - RL-42-B to BC-461
- WT-7-A Antenna Weight
Thanks
We found the two PL-112 connectors
Still missing :
- MC-215 Mechanical Spline Shaft Assembly - RL-42-B to BC-461
- WT-7-A Antenna Weight
Thanks
Re: C-47 Trailing wire system RL-42-B and BC-461
Sat Dec 01, 2012 11:17 am
The MC-215 can be shortened to the length needed if need be. We've done this before. So, like Dean mentioned, they come in a variety of lengths... err on the side of longer...
Re: C-47 Trailing wire system RL-42-B and BC-461
Fri Dec 14, 2012 10:51 am
Hello
- WT-7-A Antenna Weight found !
- WT-7-A Antenna Weight found !
Re: C-47 Trailing wire system RL-42-B and BC-461
Fri Dec 14, 2012 4:20 pm
patelie wrote:WT-7-A Antenna Weight
Also known as a "bomber egg".
Re: C-47 Trailing wire system RL-42-B and BC-461
Sun Dec 16, 2012 5:28 am
I need also to find the schematic for the connection to the RL-42-B. I already have the one for the BC-461 control box but I need to know, on the plug which is connected to the RL-42-B which is the pin to connect the +24V
There is a Maintenance Manual AN 08-10-3 but I don't have it.
There is a Maintenance Manual AN 08-10-3 but I don't have it.
Re: C-47 Trailing wire system RL-42-B and BC-461
Fri Feb 22, 2013 10:25 am
Hello
Yesterday afternoon we put together all the components for the trailing reel antenna. the RL-42-B, the BC-461, plugs and antenna weight. I made the connections between the two plugs and then the 24V DC..
It works perfectly 69 years later the motor is working well.
That's great !!!! We have now just to put all the components inside the SNAFU and find a flexible shaft for the counter.
Yesterday afternoon we put together all the components for the trailing reel antenna. the RL-42-B, the BC-461, plugs and antenna weight. I made the connections between the two plugs and then the 24V DC..
It works perfectly
69 years later the motor is working well.That's great !!!! We have now just to put all the components inside the SNAFU and find a flexible shaft for the counter.
Re: C-47 Trailing wire system RL-42-B and BC-461
Tue Apr 30, 2013 4:11 am
The MC-215 spline shafts come in many lengths; be sure to get the right one.
Re: C-47 Trailing wire system RL-42-B and BC-461
Fri May 03, 2013 1:45 am
Yes, we found the right one.
We are now at the last step : mounting again all the components inside the plane.
We are now at the last step : mounting again all the components inside the plane.
Re: C-47 Trailing wire system RL-42-B and BC-461
Fri May 24, 2013 4:40 am
Hello
I am always searching for the Maintenance Manual AN 08-10-3.
I need to find the connections of the plug which is connected to the RL-42-B in order to make the lamp of the BC-461 working.
The red warning light should be on at the moment of the antenna began to be out of the fairlead and maintained on until the weight is snug against the fairlead when the antenna is retracted.
any help is welcome.
Here is the connection for the plug of the BC-461 control box
I am always searching for the Maintenance Manual AN 08-10-3.
I need to find the connections of the plug which is connected to the RL-42-B in order to make the lamp of the BC-461 working.
The red warning light should be on at the moment of the antenna began to be out of the fairlead and maintained on until the weight is snug against the fairlead when the antenna is retracted.
any help is welcome.
Here is the connection for the plug of the BC-461 control box