MS24692-127DP Taper Pins needed

Eric Friedebach · **Posted:** Fri Feb 24, 2006 4:54 pm

They used to be known as AN385H20P6. These guys are .750 long, drilled head, cad plated.

I’ve talked to Stealth, Reid, TPS, Saturn, Westco, AMP etc. with no luck.

About two dozen are used on the fuel selector control on a T-28. Any ideas?

BrianB · **Posted:** Fri Feb 24, 2006 5:53 pm

Jay-Tex Aviation is showing 20 of the old AN p/n in stock per the ILS (Inventory Locator Service) website. Ph 903-572-1985

Eric Friedebach · **Posted:** Fri Feb 24, 2006 6:17 pm

Hey, thanks for the quick reply!

I was able to get someone on the phone there just now before the weekend. It looks they have about 12 left, so I still need to locate some more. I would actually like to get a hold of about 125 – 150 each.

bdk · **Joined:** Sun May 02, 2004 1:16 am **Posts:** 11324

Try Lance Aircraft. If they were used on the T-6 they would likely have them. I bought some tapered pins from Aircraft Spruce about 6 months ago. Not sure if they are the same- they had 3/16 thread on the end.

eric · **Joined:** Sat Aug 20, 2005 7:13 pm **Posts:** 15

if it helps i think the same pins are used on the p-40 and t-6.

Eric Friedebach · **Posted:** Wed Mar 01, 2006 4:48 pm

Thanks everyone! The threaded taper pins are AN386. I picked up some from Spruce a while back.

I’m thinking of having AMP making a quantity of them.

bdk · **Joined:** Sun May 02, 2004 1:16 am **Posts:** 11324

Doing a search for "MS24692" I found the following:

From "Haystack Logistics":

Quote:

TRIMAN INDUSTRIES INC
1042 INDUSTRIAL DRIVE
WEST BERLIN, NJ 080919164

http://www.trimanindustries.com

Quote:

ACE FASTENER CO INC
T= (856) 9641785
F= (856) 9641162
http://www.acefastener.com/ Harvey Goodwin
President
ace@erols.com

Quote:

DYNAMATION RESEARCH
T= (310) 4771224
F= (310) 4795656
http://www.dynamation.com Bernie Nolan
Sales Manager
bernie@dynamation.com

Quote:

Dan Farber
President
info@brightlightsusa.com
Tel: (856) 546-5656
Fax: (856) 546-9191

Quote:

D AND T FASTENERS
136 MAIN ST
SPENCER, MA 015620092
Tel: (508) 885-2788 Fax: (508) 519-8132

From "Catalog Express":

Quote:

Name: Allmetal Screw Products Corp

Address:
94A E Jefryn Blvd
Deer Park NY 11729
USA

Telephone: 631-243-5200
Telephone: 800-248-9755
FAX: 631-243-5307

Quote:

Name: ASC International Inc, ASC Industries

Address:
1227 Corporate Dr W PO Box 200728
Arlington TX 76006
USA

Telephone: 817-640-1300
FAX: 817-649-2685

These may not be in stock, but they may be able to order or make them for you (according to Uncle Sam).

Or, you could look at the spec and maybe buy a tapered pin with threads that will fit, cut off the threads and drill your own hole.

Eric Friedebach · **Posted:** Wed Mar 01, 2006 11:07 pm

Hey, bdk, I really appreciate those leads!

I’ll burn up the phone lines tomorrow and see what I can find.

Warbird Information Exchange

MS24692-127DP Taper Pins needed

Who is online